Our Products
Electronic Timers
A-Series
Product Features:
- Din sized enclosure for Track (Din rail) / Screw mounting.
- Front terminal protective cover for safety.
- LED indication for timing in progress.
- A1DA : External (zero volt / potential free) command contact for timing initiation.
B-Series
Product Features:
- Din sized enclosure for Track (Din rail) / Screw mounting.
- B1DCA-X, B1DCA-T : Independently selectable ON & OFF time.
- B1DCA-T : HOLD / RESTART facility during power fail conditions.
- Program - enable / disable facility for tamper proof operation.
- SPP-T : Trips under phase missing, phase reversal or phase unbalance
- Auto / Manual switch for mode of operation
- In manual mode, terminals provided to connect to switch so as to manually switch ON and switch OFF load
Digital Timers
Product Features:
- Din Sized enclosuer for panel mounting.
- Digital dual display for set value and process value.
- FUNCTION (programmable): ON DELAY / INTERVAL /CYCLIC ADJUSTABLE.
- TYPE OF START SIGNAL (programable) : NO START / PULSE / CONTINUOUS.
- One of the relay c/o can be configured as INSTANT or DELAYED.
- Program lock is provided for function, relay configuration, type of start signal and range selected.
- RESET cum START facility can be achieved either through front buttons Or Rear terminals
- HOLD/RESTART facility during power failure conditions.
- Internal Resettable fuse for protection of device against voltage fluctuations(N.A. for H3PT-MU). Digital display will blink whenever voltage exceeds specified voltage range. Switch off the unit for sometime & then switch on when voltage returns to normal
H-Series
Product Features:
- Din sized enclosure for Panel / Flush mounting having front protective cover for safety.
- Timer and base available for Track (Din rail) / Screw mounting (except H3D1).
- Large transparent knob with lock is provided for precise time setting and protect from unintentional change of time setting.
- LED indication for timing in progress
- H1DA-X : Accepts any voltage from 12V AC/DC to 240V AC / 220V DC as signal between command contacts for timing initiation.
- H1D1-X, H3D1: Multifunction-On-Delay / Interval / Equal Cyclic-On / Equal Cyclic-Off programmable.
S-Series
Product Features:
- Suitable for screw mounting(except ST4-M1).
- 7 segment display indication for channel and timing operation (except ST-4M1).
- User friendly programming for ON/OFF time selection independently (except ST-4M1).
- Hold /Restart feature is available during power failure, Over voltage protection(except ST-4M1).
- ST-6M1 / ST-10M2 / ST-10M1 : pulse start signal.
- ST-15M2 / ST-4M1 : continuous start signal.
- S1D-C8M3 : Comprises of 8 Relays and each relay can be programmed for maximum of 8 switchings in a cycle.
- Application: Bag filters, Dust collectors, Water treatment plants etc.
- Internal Resettable fuse for protection of device against voltage fluctuations. Digital display will blink whenever the voltage exceeds specified voltage range. Switch off the unit for sometime & then switch on when voltage returns to normal.
